Gauging & Measurement

Reduce aerosol production line quality costs with the new Award Winning STT Crimp Depth & Diameter Gauge.

Accurately monitoring crimp quality on process lines can be a big headache. The new STT Gauge will give you confidence that your quality control is effectively cutting reject costs.  Click Here For More Details

Combine fast, accurate, multi-point inspection of high volume components with flexibility and rapid change over from one component to the next.

The gauging machine is set to a dedicated master & linked to a computer running either your own software or bespoke software supplied by ourselves.

18 transducers are premenantly fitted to the top & bottom of the machine. This reduces the cost of fixturing for as you only need to buy one set of transducers which are then used for all sets of tooling.

Each additional component added only needs the mechanical tooling & a software update.   

Set up time - approx 15 mins
Inspection cycle - approx 10 secsonds.

Two part tooling, dedicated to specific blades, is loaded to the upper and lower platform which are pneumatically controlled.

This utilises the existing probes.

Free standing manually indexed gauge rotates through a total of 70º of twist as it moves to each gauging position.

Rollers track, guide and position the blade with the aid of precision slides and trunnion bearings, maintaining correct orientation of blade to gauging head.

Radial profile gauges for high speed checking of form and size on blade segments after precision radial grinding.

The gauging units consist of a standard radial arm fixture with interchangeable location nests and gauge heads.

There is a choice of data display devices from columns to touch screen pc's.

Electronic sensing ensures the component is located correctly, before pneumatically operated precision slides accurately position gauge heads and activate probe levers.

Readings are taken via transducers and compared to sizes obtained from a setting master, the results can be analysed/displayed by either PC or electronic columns.

Two types of gauge with changeable parts will check a range of diameters, of both inner and outer bearing raceways; the third gauge checks the diametrical clearance (DC) between the inner and outer raceway assemblies.

Fixture holds a turbine blade (can be modified to take any type of component) for multi-axis manipulation, for testing in this instance, for casting flaws on an x-ray machine.